About Op COM Can Bus Interface Auto Scanner
2016-10-20 14:05:00Function:
-It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.(OBD Diganostic Scanner)
-The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
-The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, and Body Control Unit, just to name a few examples.
-Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
-PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
-Fault codes will be shown with all available information:
Full fault code text description
-Full status information (Present, Not present, Intermittent)
-You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
-The program shows you measuring block information on many control modules; you can choose anything from the list on your own.
-The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like ----Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
Features:
1. The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
2. The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
3. Compared to the TECH2, which is the dealers tool (with a 32 MB card+CANdi interface), the price of OP-COM for DIGIOBD is quite affordable.
OP-COM is under continous development, new version will be availabe approximately every 3-4 month.OP-COM is currently available in English.
More from skype:autodiag.tech
Website:www.obdiifactory.com
Autodiag Technology was established in 2004,The main:OBD Diagnostic Scanner,ELM327,Autocom CDP+,obd2 7pin adapter,code reader,launch X431,B341,Vag Diagnostic Tool.hotline:86-755-29055709
