Toyota Smart Keymaker OBD2 Eobd Key Programmer

Description:

1.Safe and efficient: Only need 20 seconds to add one key 

2.It is safe for the security alarm system

3.Support all kinds of For Toyota and for Lexus smart key system: support K line and CAN-BUS protocols

4.It is the most safe and fast key programmer device for Toyota and for Lexus series till now.

5.It supports all key lost.

Operation instructions:

Use the main key to add the other keys:

1.Connect the programmer to the OBD port of the car, there are some short beep sounds after power on, it enters auto search car status. 

2.Press the start button twice to wake up the anti-theft module. When the connection with the module is done successfully after 7 seconds, there is a long beep 4-5 sounds (4 sounds means the system is IV K system, 5 sounds means V CANBUS system). Wait 30 seconds, there are a long beep sounds, it means the car enter into add key state. 

3.Add smart key: put the original car key (with the logo side) access to the start button, you should hear two beep sounds. SEC light will flash twice; within 5 seconds, put the key close to the start button, you should hear 2 beep sound, SEC light will flash twice; after learn all the smart key, wait 30 seconds till SEC light begin flash, and the car will close adaptation mode automatically.

All the key was lost or only have vice key, need to do initialization: 

1.Press constantly the LED button, and plug into the OBD port of the car, after two short beep sounds, finish press, it enters into auto search car status. 

2.Press the start button twice, in order to wake the anti-theft computer. When the connection with the Computer of car is done successfully after 7 seconds, there is a long beep 4-5 sound (4 sounds mean the system is IV K system, 5 sounds mean V CANBUS system), 5 seconds later, LED light go out. Wait 10-16 minutes,there are a long beep sounds, and LED light flicker, it means the car enter into study key state. 

3.All keys lost matching mode: Add every smart key which need to program(with the logo side)access to the start button, meanwhile you will here two beep sound. SEC light will shine twice; After you finisher studying all the smart keys, wait 30 seconds till SEC light shining, the system will Auto-close study state

Notice: 

1.Must use the right new smart keymaker, and follow the right step above, otherwise you take the consequences.

2.If the device can match the key, and LED light shining constantly, please clear the error code by using anti-theft system such as T300.

3.After finishing program keys, the key can start but the SEC light is still turn on, maybe you use the vice key, only main key can manually shut the study mode.

4.Don't try to open the cover of programmer and dash board, otherwise you take the consequences.

5.This machine is only provided for the legal auto repair. Otherwise you will take the above consequences.

  ◆   Company Strength

	→  Paul-USA
	Paul has work with Our Company for 10 years,He is not only our business partner but also very good friend of our boss,honestly,he said he has quite a few choice for suppliers,but work so many years with us not only our products are good quality,service is nice...
	→  Van Dijk-Netherland
	We have do business together for years,When Autodiag come to Germany for exhibition,i went to meet them,Carl is a very nice and honest person,do business with them is happy,wish a long cooperation with them!...
	Julio -- Spain
	Autodiag is the best supplier in china,before i found them,i already in this business for years,honestly,compare to Autodiag,all other company is crap.
	Vladimir Chuvakin -- Russia
	Before we are not sure business with Autodiag,After we see their factory,we want to business with them and want to more in future!

 ◆   About Autodiag

??ShenZhen Autodiag Technology Co., Ltd  was established in 2004,Specialized in Auto diagnostic Products more than 10 years.

Our factory is SGS certificated factory with 200 employees , we have a 8 professional technicians R&D Team which is rare in the whole industry, the workshop occupy an area of 5000 square meters, the annual production output was more than 1 million items which 30% are new products. we have our own brand V-Checker and we are able to do OEM or ODM. More importantly, We have very strict quality control system. From very strict factory QE Process to Authority products certificate, SGS,CE, ROHS and UL Tests, Meanwhile, We have very good cooperation with Launch, Autel and YanHua ,we are authorized dealer of these brands.
??

We have 10 years successful foreign trading experience ,have build good partnership with clients from 35 different countries, Now we have official distributors in Poland, Germany, Spain, France, UK ,Argentina and New Zealand ,Clients come to visit every month and we have been to different countries to hold exhibition, Such as Automechanika 2012&2014 in Frankfurt, and now we are preparing for the next AAPEX Show in Las Vegas.

Reliable quality products, best price, professional technician& customer service, ability to develop new products, fast and safe delivery, Life long products warranty make us best diagnostic tools factory in Shenzhen ,and our goal is be the BEST auto diagnostic factory in china, Be clients’ best supplier in the world!